The J-type fuse carrier is designed according to industry standards, and the 400A rated fuse is one of our best-selling products.
This pole mounted fuse has a notch design that is easy to install and use, making it an ideal method for providing safe, protected,
and reliable low-voltage and medium voltage power sources for rural residential areas.
This type of molten incision is made of glass reinforced polyester with high wear resistance, and compared to many traditional
materials such as porcelain, its appearance and non-destructive resistance are not prominent.
Each fuse cut has fuse contacts and cable terminal blocks, made of pure copper and bright tin plating. These terminal boards
come with M12 retention bolts, nuts, and washers for receiving cable sockets (cable lugs) up to 300 MM2 (compression type
only, 300MM2 with copper or aluminum wires).
For easy installation on walls or wooden poles, the fuse cut is equipped with M2 length screws for cross arm installation,
and the fuse can be equipped with M2 nuts, bolts, and washers.
| Model No. |
Fixed Arrangements |
| 54611-18 |
400A fuse is used for pole or wall mounting with c/w M12 long screws |
| 54611-06 |
The 400A fuse is used for installing c/w M12 bolts, nuts, and washers on the cross arm. |
| 58424-03 |
Spare fuse holder |
Noted: If there are 16MM or larger holes in the lifting ears, it is recommended to use stepped washers.
Fuse Links
This type of fused cut design is used to accommodate the BS88 Part 5: 1988 standard wedge fuse link.
After testing and approval, it is suitable for responsibility category 415 AC 80.
The fixed center requirement is 82MM.
The standard fuse link rating range is 20A-400A.
Descriptions
J Type Fuse Cutout Carrier
Safety Standards
BS 88 or IEC 60269
Whether with sliver
With The Sliver
Name
Pole Mounted fused cut-out
Application
Protect and reliable Low/Middle Voltage power supply
Audited Supplier 
){kind=link}
){kind=link}